ASE A6 · Electrical/Electronic Systems

Battery & Starting

Low-voltage battery and starting system service: battery types and testing, charging and jump-starting, memory retention, starter draw and voltage drop tests, and slow or no-crank diagnosis.

Questions on the A6 test
9
Share of the test
18%
GearheadPass questions
31
With exhibits
5

What this area covers

ASE's task list for Battery & Starting on the A6 Electrical/Electronic Systems test groups into these tasks. Expect diagnosis-first questions: what's the most likely cause, what should be checked next, and which technician is right.

  • Battery types and configurations
  • State-of-charge and load testing
  • Charging, jump-starting and memory
  • Cables, clamps and hold-downs
  • Starter draw and voltage drop tests
  • Electrical vs. mechanical no-crank

How to study it

  • This area carries 9 of the A6 test's questions (18%). Give it study time in proportion.
  • Work the free questions first, then read every explanation, including the ones you got right; the reasoning is what transfers to new questions.
  • 2 of the 5 free questions here are Technician A/B items. Judge each statement on its own before you pick A only, B only, Both or Neither.
  • 2 free questions use an exhibit. Read the exhibit's numbers before the answer options.
  • Always confirm specifications in the vehicle manufacturer's service information. Test questions assume you would.

Free practice quiz

5 Battery & Starting questions with explanations

Start →

All 31 Battery & Starting questions are in the app

Plus a full-length A6 mock, flash cards, and English or Spanish on every question.

More A6 content areas