ASE A2 · Automatic Transmission/Transaxle

Unit Removal, Inspection & Installation

Removing, overhauling and reinstalling the transmission: converter and flexplate checks, measurements during teardown, clutch packs and bands, and relearn after install.

Questions on the A2 test
7
Share of the test
16%
GearheadPass questions
36
With exhibits
4

What this area covers

ASE's task list for Unit Removal, Inspection & Installation on the A2 Automatic Transmission/Transaxle test groups into these tasks. Expect diagnosis-first questions: what's the most likely cause, what should be checked next, and which technician is right.

  • Removal and converter installation
  • Flexplate, cooler and routing checks
  • Software updates and relearns
  • Pump, shafts, bushings and end play
  • Planetary, chains and final drive
  • Clutch packs, bands and air testing

How to study it

  • This area carries 7 of the A2 test's questions (16%). Give it study time in proportion.
  • Work the free questions first, then read every explanation, including the ones you got right; the reasoning is what transfers to new questions.
  • 1 of the 5 free questions here are Technician A/B items. Judge each statement on its own before you pick A only, B only, Both or Neither.
  • Always confirm specifications in the vehicle manufacturer's service information. Test questions assume you would.

Free practice quiz

5 Unit Removal, Inspection & Installation questions with explanations

Start →

All 36 Unit Removal, Inspection & Installation questions are in the app

Plus a full-length A2 mock, flash cards, and English or Spanish on every question.

More A2 content areas